NETGEAR suggests that during the initial setup, you carry the system to the same room as your wireless router. Shift the extender to its intended position after the setup is complete and checked as having a working connection to your wireless router.
Netgear New Extender Extender Manual Setup Guide:
- Scan for the wireless network and join the NETGEAR_EXT network using a wireless activated computer.
- There is no password needed.
- Open a browser window on the same machine.
- Release of Smart Wizard. Navigate to www.mywifiext.net if it does not.
- Within its range, Smart Wizard searches for established wireless networks.
- A list of wireless networks within a range is shown when the search is complete.
- Choose the name of your current wireless network to be expanded, and then press Proceed.
- Enter your wireless network’s security key or passphrase and press Proceed.
Click the check box to retain the same wireless settings for the extender as the current network.
- To link to the current wireless network, the Smart Wizard takes approximately two minutes.
- The following message is shown after the extender connects to the current wireless network:
- Only click OK.
- The Smart Wizard shows descriptions of the wireless settings of the extender.
- To access the extender wireless network, use a wireless router.
Netgear New Extender Setup: WPS Guide
- Plug-in your Wifi range extender into an electrical outlet.
- Place it near to your Wifi network router.
- Now press the WPS button on the front-panel of the extender.
- Press the WPS button on the router.
- Now, wait for the light to turn and start blinking.
- After that place the Netgear Extender setup between the dead spot and router.
- If you still face trouble, contact-us anytime 24*7.
Netgear New Extender WiFi Extender: Specification
Specs For Netgear New Extender:
The New Extender has four LED indicators on the front. This shows the signal strength, data transfer, WPS encryption and Wi-Fi working status of the current router.At the same time, any fault can also be seen by the indicator light.A 100M LAN port is built into this awesome extender so that the laptop can also access the wireless network.Moreover, WPS one-key encryption, the system reset key, is also set next to the Ethernet port, which makes it very easy to use.
The New Extender’s two external gains are 2dbi high-performance omni directional antennas, which can completely meet the coverage of the wireless signal. At a certain angle, the two can be rotated, just like the robot’s antennae, but not detachable. The standard two plug-in designs of its power plug, compatibility is very strong, will fit to most of the socket.
The New Extender has a mark on the bottom with product details. This label has the default IP and MAC address, default username and password, which is very handy for setup and use of www.mywifiext.net.
Is the New Extender setup still unable to perform? Using our Toll-Free now and getting an expert’s assistance!